高级检索

    ZnAl-LDH衍生ZnO原位锚定煤沥青基碳及其储钠性能

    ZnAl-LDH derived in-situ ZnO anchoring on coal tar pitch-based carbon for sodium storage

    • 摘要: 得益于钠资源储量丰富、分布广泛等优势,钠离子电池近年来发展迅速。在众多候选负极材料中,沥青基碳具有结构可调的特点,而ZnO可通过转化反应贡献较高的储钠容量。为解决沥青基碳储钠活性位点不足及ZnO循环过程中体积膨胀的问题,本文以锌铝层状双氢氧化物(ZnAl-LDH)兼顾结构模板和ZnO前驱体,与煤沥青(CTP)按不同质量比复合,通过碳化、碱洗工艺制备负极复合材料。ZnAl-LDH 掺量可精准调控材料物相、微观形貌与孔隙结构。ZnO/CTP-1/1-C在100mA g-1循环 100 圈可逆比容量达382mAh g-1,5A g-1循环 1000 圈仍保有175mAh g-1,1.2mV s-1下电容贡献达 93.9%,循环生成的稳定SEI膜可抑制界面副反应。该耦合结构可原位锚定 ZnO 纳米颗粒并缓冲体积形变,为低成本沥青基储钠负极开发提供了可行思路。

       

      Abstract: Owing to the abundance and wide distribution of sodium resources, sodium-ion batteries continue to develop rapidly. Among candidate anode materials, pitch-derived carbon features structural tunability, whereas ZnO contributes a high sodium storage capacity through conversion reactions. To simultaneously address the insufficient active sites for sodium storage in pitch-derived carbon and the aggregation and volume expansion of ZnO during cycling, ZnAl layered double hydroxide (ZnAl-LDH) serves as both a structural template and a ZnO precursor and is combined with coal tar pitch (CTP) at different mass ratios. Subsequent carbonization and alkali washing yield composites as anode materials. The ZnAl-LDH content precisely regulates the phase composition, microstructure, and pore structure of the composites. ZnO/CTP-1/1-C delivers a reversible specific capacity of 382 mAh g-1 after 100 cycles at 100 mA g-1 and retains 175 mAh g-1 after 1000 cycles at 5 A g-1. At a scan rate of 1.2 mV s-1, the capacitive contribution reaches 93.9%. Meanwhile, a stable solid electrolyte interphase forms during cycling and suppresses interfacial side reactions. This coupled architecture enables the in situ anchoring of ZnO nanoparticles and accommodates their volume changes, providing a feasible strategy for developing low cost pitch-derived anode materials for sodium-ion batteries.

       

    /

    返回文章
    返回