高级检索

    高稳定性胺修饰镁铝复合金属氧化物在烟气中的碳捕集性能

    Carbon capture performance of amine-functionalized magnesium aluminum mixed metal oxides with high stability in flue gas

    • 摘要: 寻找用于碳捕集的高稳定性固态胺材料对于实现碳减排目标非常重要。层状双氢氧化物(layered double hydroxides,LDHs)具有高度分散的空间结构,其煅烧后得到的混合金属氧化物(mixed metal oxides,MMOs)形成丰富的狭缝状介孔和较宽的孔径分布,可作为潜在的载体制备固态胺吸附剂。以0.55镁铝物质的量比制备复合金属氧化物Mg0.55Al-O,并与商业化介孔材料SBA-15对比,采用浸渍法制备不同聚乙烯亚胺(polyethyleneimine,PEI)负载量的固态胺吸附剂,探究了2种吸附剂在模拟烟气条件下(CO2体积分数为15%的CO2、N2混合气)的CO2吸脱附特性与稳定性。Mg0.55Al-O具有大量介孔,孔道直径范围5~20 nm,随着PEI负载量的增加,载体孔道逐渐被填充。当PEI负载量(质量分数)超过33%时,以Mg0.55Al-O为载体的吸附剂相比胺功能化SBA-15具有更高的CO2吸附量,2种吸附剂都在PEI负载量为67%时达到最大吸附量。原位红外结果表明,Mg0.55Al-O-PEI吸附剂可生成氨基甲酸吸附产物,提高CO2与氨基反应比,从而提高吸附剂胺效率。使用热重分析仪在75 ℃,CO2体积分数为15%的CO2、N2混合气条件下吸附60 min得到Mg0.55Al-O-67PEI和SBA-15-67PEI吸附量分别为3.44和2.81 mmol/g。不同于SBA-15与PEI的氢键连接方式,Mg0.55Al-O与PEI之间可形成静电吸引,从而具有更好的热稳定性。高温脱附实验表明,Mg0.55Al-O-67PEI在经过300 ℃热处理后仍具有吸附活性,经过110次吸附解吸循环保留了3.28 mmol/g的吸附量,证明了循环中胺基分子的高稳定性。

       

      Abstract: Developing highly stable solid amine materials for carbon capture is essential for achieving carbon emission reduction goals. Layered double hydroxides (LDHs) possess a highly dispersed spatial structure, and their calcined derivatives—mixed metal oxides (MMOs)—offer abundant slit-like mesopores and a broad pore size distribution, making them promising supports for preparing solid amine adsorbents. Mixed metal oxide Mg0.55Al-O was synthesized with a Mg/Al ratio of 0.55 and compared with the commercially available mesoporous material SBA-15. A series of solid amine adsorbents with different polyethyleneimine (PEI) loadings were prepared via the impregnation method, the CO2 adsorption–desorption properties and stability were investigated under simulated flue gas conditions (the mixed gas of CO2 and N2 with φ(CO2) is 15%). Mg0.55Al-O exhibits a high density of mesopores with pore diameters ranging from 5 to 20 nm, its pores are gradually filled with increasing PEI content. When the PEI loading exceeds 33%, the Mg0.55Al-O-based adsorbents demonstrate higher CO2 adsorption capacity than the PEI-functionalized SBA-15. Both types of adsorbents reach their maximum CO2 uptake at 67% PEI. In-situ FTIR reveals that Mg0.55Al-O- PEI adsorbents form carbamic acid adsorption species during CO2 adsorption, enhancing the reaction efficiency between CO2 and amine groups and thus improving amine efficiency. Thermogravimetric analysis at 75 ℃ under the condition that the mixed gas of CO2 and N2 with φ(CO2) is 15% for 60 minutes shows CO2 uptakes of 3.44 and 2.81 mmol/g for Mg0.55Al-O-67PEI and SBA-15-67PEI, respectively. Unlike the hydrogen bonding between PEI and SBA-15, strong electrostatic interactions between PEI and Mg0.55Al-O contribute to superior thermal stability. High-temperature desorption experiments confirm that Mg0.55Al-O-67PEI retains its adsorption activity after treatment at 300 ℃. After 110 adsorption–desorption cycles, it still maintains a CO2 capacity of 3.28 mmol/g, indicating excellent stability of the amine groups during long-term cyclic operation.

       

    /

    返回文章
    返回